"Is the 3 Serisi 320d reliable, and what should you check?"
When buying a used BMW 3 Series 320d 2011 (E90 / E91 / E92 / E93 / facelift), the most frequently mentioned issue is oil consumption and oil leaks. Timing chain stretching/breaking is also commonly reported.
Engine: N47
N47D20C · 320d · Used in this car from 2008-2014
Strengths
Wide selection of versions and modifications
Economical for such power output
Watch-outs
Many problems with early diesel versions
Frequent oil leaks
Many versions have piezo injectors
Known engine issues
Timing chain driveEarly engines had low timing chain lifespan: guides wore out, chains stretched, and sharp teeth on the crankshaft sprocket accelerated the process. On updated N47TU or N47N engines, most weak points were eliminated.
Cracks in the blockThe aluminum block was initially designed without a special safety margin, and severe overheating could cause cracks between the second and third cylinders. With the update, the block was reinforced and such problems almost ceased.
Fuel systemAll engines in this series are equipped with a reliable Bosch Common Rail fuel system, but powerful versions with piezo injectors are quite demanding on fuel quality. Also, avoid driving with an empty tank, as the high-pressure pump may suck in air and start producing metal shavings.
Listed from most frequently reported, each with its source.
Oil consumption and oil leaks
Often reported
Some users report higher than normal oil consumption and leaks from gaskets or housings such as the valve cover/PCV valve. Oil consumption can affect turbocharger lubrication and mechanical component durability; untreated leaks can lead to further issues.
Engine Bay
Timing chain stretching/breaking
Often reported
The 2.0 diesel engine (N47 family, up to 184 HP) in the 320d F30 (2012-2016) is known for timing chain issues: the chain can stretch prematurely, produce metallic noises (especially when cold around 1,500-1,800 rpm), and in severe cases jump or break.
Timing chain
Frequent DPF clogging and regenerations
Often reported
The DPF tends to clog if the vehicle is mostly used for short or city trips, leading to frequent regenerations, increased fan noise, engine warning light, and power loss.
Exhaust Emissions
Injectors and high-pressure pump
Often reported
Some 2.0 diesel engines report issues with injectors and the high-pressure fuel pump (HPFP), which can cause starting difficulties, power loss, abnormal noises, and increased fuel consumption.
Fuel System
Turbocharger issues
Often reported
Recurring reports indicate that the turbocharger or its variable geometry actuator may fail or wear prematurely, resulting in power loss, exhaust smoke, abnormal noises, or the check engine light coming on.
Turbo
BMW 3 Serisi 320d technical specs
BMW 3 Serisi 320d (2011): boot 460 L; fuel use 5,7 l/100 km (urban 7,2 l/100 km · extra-urban 4,8 l/100 km); 0–100 in 8 s.
Boot capacity
460 L
Fuel consumption
5,7 l/100 km (urban 7,2 l/100 km · extra-urban 4,8 l/100 km)
What should I look for when buying a BMW 3 Series 320d?+
When buying a 2011 320d, check the service history, perform a test drive, and inspect engine/transmission warnings. The most commonly reported issues: oil consumption and oil leaks; timing chain stretching/breaking; frequent DPF clogging and regenerations.
What are the common problems of the BMW 3 Series 320d?+
The most frequently reported issues: oil consumption and oil leaks; timing chain stretching/breaking; frequent DPF clogging and regenerations.
Is the BMW 3 Series 320d reliable?+
Rather than a simple yes/no, it's best to weigh the proven pros and cons together. This page lists 5 verified findings.
How does Carbeak collect data?+
The cards on this page are derived from the Difetti fault database; the source vehicle is matched to the target vehicle by brand, fuel type, engine, and generation. Topics with insufficient evidence are not shown.