"Is the 5 Serisi 520d reliable, and what should you check?"
The most commonly reported issue when buying a used BMW 5 Series 520d 2013 (F07 / F10 / F10M / F11): timing chain wear and breakage. Also, DPF clogging and wear are frequently reported.
Engine: N47
N47D20C · 520d · Used in this car from 2008-2013
Strengths
Wide selection of versions and modifications
Economical for such power output
Watch-outs
Many problems with early diesel versions
Frequent oil leaks
Many versions have piezo injectors
Known engine issues
Timing chain driveEarly engines had low timing chain lifespan: guides wore out, chains stretched, and sharp teeth on the crankshaft sprocket accelerated the process. On updated N47TU or N47N engines, most weak points were eliminated.
Cracks in the blockThe aluminum block was initially designed without a special safety margin, and severe overheating could cause cracks between the second and third cylinders. With the update, the block was reinforced and such problems almost ceased.
Fuel systemAll engines in this series are equipped with a reliable Bosch Common Rail fuel system, but powerful versions with piezo injectors are quite demanding on fuel quality. Also, avoid driving with an empty tank, as the high-pressure pump may suck in air and start producing metal shavings.
Listed from most frequently reported, each with its source.
Timing chain wear and breakage
Often reported
The 2.0 N47/N47TU engine in the 520d F10 is known for premature wear and occasional breakage of the timing chain and guides.
Timing chain
DPF clogging and wear
Often reported
The DPF in the 520d can clog, especially with city driving or short trips that prevent effective regeneration.
Exhaust Emissions
Carbon buildup and EGR faults
Often reported
N47 diesel engines tend to have carbon deposits clogging the EGR valve and related pipes; this can cause rough idle, delayed throttle response, and more frequent DPF regeneration.
Exhaust Emissions
High-pressure pump and injector faults
Often reported
Many 2.0 N47 engines report high-pressure fuel pump (HPFP) and CommonRail/piezo injector failures. Symptoms often include sudden power loss, 'engine malfunction' warning, and stalling. Metal particles or wear in the system can cause damage.
Fuel System
Turbo/wastegate issues and turbo leaks
Often reported
Abnormalities in the turbocharger and related components (wastegate/actuators) have been reported; symptoms may include power loss, abnormal whistling, pressure loss, and oil consumption. In some cases, turbo repair or replacement has been necessary.
Turbo
BMW 5 Serisi 520d technical specs
BMW 5 Serisi 520d (2013): boot 500 L; fuel use 5,5 l/100 km (urban 6,2 l/100 km · extra-urban 5 l/100 km); 0–100 in 8.9 s.
Boot capacity
500 L
Fuel consumption
5,5 l/100 km (urban 6,2 l/100 km · extra-urban 5 l/100 km)
What should I look for when buying a BMW 5 Series 520d?+
When buying a 2013 520d, check the service history, test drive, and engine/transmission warnings. The most commonly reported issues: timing chain wear and breakage; DPF clogging and wear; carbon buildup and EGR faults.
What are the chronic problems of the BMW 5 Series 520d?+
The most commonly reported issues: timing chain wear and breakage; DPF clogging and wear; carbon buildup and EGR faults.
Is the BMW 5 Series 520d reliable?+
Rather than a simple yes/no, it is necessary to evaluate the proven pros and cons together. This page lists 5 verified findings.
How does Carbeak collect data?+
The cards on this page are derived from the Difetti fault database records; brand, fuel, engine, and generation compatibility between the source vehicle and the target vehicle is verified. Topics with insufficient evidence are not shown.