"Is the 2 Serisi 218d reliable, and what should you check?"
The most frequently mentioned issue when buying a used BMW 2 Series 218d 2019 (F22 / F23 / F87 / LCI): Timing chain tension/breakage (N47). Also, DPF and EGR clogging are commonly reported.
Engine: B47
B47D20A · 218d · Used in this car from 2016-2020
Known engine issues
EGR valveMost problems of this engine are related to the EGR system, called AGR here. In early years, the valve could clog at 30,000 km and a recall campaign was even conducted. When it sticks open, overheating causes the intake manifold to crack.
Intake cloggingThe second most frequent service issue is clogging of the intake manifold and ports in the cylinder head, leading to loss of power and unstable engine operation. In severe cases, the intake swirl flaps may stick and break off.
Timing chain stretchThe chain timing drive on B-series engines differs little from N-series predecessors and may require attention before 200,000 km under very active use. There is already a cost-effective procedure to replace these chains without removing the engine.
+1 more issues on the engine detail page
Known issues and risks
Listed from most frequently reported, each with its source.
Timing chain tension/breakage (N47)
Often reported
Many BMW diesel vehicles with the N47 engine report premature timing chain tension and wear. This can cause metallic noises and, if not caught in time, risk serious engine damage.
Timing chain
DPF and EGR clogging
Often reported
Frequent city driving in this 2.0 diesel engine can lead to DPF clogging and EGR valve issues.
Exhaust Emissions
High-pressure pump/injector problems (CP4)
Often reported
BMW 2.0 diesel engines report faults or malfunctions in the high-pressure fuel pump (Bosch CP4); this can cause pressure loss, heavy smoke, or failure to start.
Fuel System
Turbocharger failures/actuator or wastegate issues
Often reported
Users report turbocharger problems, especially actuator or wastegate failures; this can cause power loss, turbo lag, or a check engine light. Symptoms include abnormal whistling, smoke, and poor performance.
Turbo
BMW 2 Serisi 218d technical specs
BMW 2 Serisi 218d (2019): boot 390 L; fuel use 4,4 l/100 km (urban 5,3 l/100 km · extra-urban 3,9 l/100 km); 0–100 in 8.4 s.
Boot capacity
390 L
Fuel consumption
4,4 l/100 km (urban 5,3 l/100 km · extra-urban 3,9 l/100 km)
What should I look for when buying a BMW 2 Series 218d?+
When buying a 2019 218d, check the service history, test drive, and look for engine/transmission warnings. Most commonly reported issues: timing chain tension/breakage (N47); DPF and EGR clogging; high-pressure pump/injector problems (CP4).
What are the chronic problems of the BMW 2 Series 218d?+
Most commonly reported issues: timing chain tension/breakage (N47); DPF and EGR clogging; high-pressure pump/injector problems (CP4).
Is the BMW 2 Series 218d reliable?+
Rather than a simple yes/no, it's best to weigh the proven pros and cons together. This page lists 4 verified findings.
How does Carbeak collect data?+
The cards on this page are derived from the Difetti fault database; the source vehicle is matched to the target vehicle by brand, fuel type, engine, and generation. Topics with insufficient evidence are not shown.