"Is the Auris 2.0 d reliable, and what should you check?"
The most frequently mentioned issue when buying a used 2012 Toyota Auris 2.0 D: Dual mass flywheel wear (expensive replacement). Also, oil accumulation in the intercooler / EGR problems are commonly reported.
Engine: 1ADFTV
1AD-FTV · 2.0 d · Used in this car from 2010-2015
Strengths
Relatively low fuel consumption
Good torque at any RPM
Watch-outs
Head gasket blows quite often
Oil consumption starts from first km
EGR valve quickly clogs with carbon
Known engine issues
Head gasket failureThe most known problem of these diesels is regular head gasket blowout. These engines also suffer from erosion of mating surfaces, which aggravates the situation.
Oil consumptionSecond in number of complaints on the forum is progressive oil consumption. Several recall campaigns were even conducted to replace pistons, but oil consumption did not disappear.
Burnout of washers under injectorsEvery 60,000 km it is advisable to replace washers under injectors, otherwise they will burn out and then only a skilled specialist can remove stuck injectors without breaking them.
Listed from most frequently reported, each with its source.
Dual mass flywheel wear (expensive replacement)
Often reported
The dual mass flywheel (DMF) can wear prematurely, especially with heavy use or high mileage. Replacement of the flywheel and related clutch is expensive.
Clutch
Oil accumulation in the intercooler / EGR problems
Often reported
Oil can accumulate in the intercooler or intake circuit, leading to blockages, EGR faults, and impaired DPF regeneration.
Engine Bay
Oil consumption and gasket failure
Often reported
Excessive oil consumption is commonly reported in 2.0 D4D engine examples, along with gasket failure or damage due to carbon deposits on pistons in some cases.
Engine Internal
Clogged Diesel Particulate Filter (DPF)
Often reported
Frequent DPF clogging and ineffective regenerations are reported in many D4D diesel models including the 2.0 126 HP in the Auris E150.
Exhaust Emissions
Turbo failure or wear
Often reported
Turbocharger failures (power loss, heavy smoke, abnormal noises) are reported in Toyota diesel engines of the same family. Turbo failure can result from debris/oil accumulation, wear, or usage and maintenance issues.
Turbo
Toyota Auris 2.0 d technical specs
Toyota Auris 2.0 d (2012): boot 530 L; fuel use 4,5 l/100 km (urban 5,4 l/100 km · extra-urban 4 l/100 km); 0–100 in 10.5 s.
Boot capacity
530 L
Fuel consumption
4,5 l/100 km (urban 5,4 l/100 km · extra-urban 4 l/100 km)
What should I look for when buying a Toyota Auris 2.0 D?+
When buying a 2012 model 2.0 D, check the service history, test drive, and engine/transmission warnings. The most commonly reported issues: Dual mass flywheel wear (expensive replacement); Oil accumulation in the intercooler / EGR problems; Oil consumption and gasket failure.
What are the common problems of Toyota Auris 2.0 D?+
The most commonly reported issues: Dual mass flywheel wear (expensive replacement); Oil accumulation in the intercooler / EGR problems; Oil consumption and gasket failure.
Is the Toyota Auris 2.0 D reliable?+
Instead of a simple yes/no, it's necessary to evaluate the proven pros and cons together. This page lists 5 verified findings.
How does Carbeak collect data?+
The cards on this page are derived from Difetti fault database records; the source vehicle and target vehicle are verified for brand, fuel, engine, and generation compatibility. Topics with insufficient evidence are not shown.