What are the common problems of the 4 2.0 BlueHDi Stop&Start?

2016 · 2.0 BlueHDi Stop&Start · 3 verified findings
"Is the 4 2.0 BlueHDi Stop&Start reliable, and what should you check?"

When buying a used DS 4 2.0 BlueHDi Stop&Start 2016, the most frequently mentioned issue is water pump and cooling system problems. Additionally, EGR clogging and carbon buildup are also commonly reported.

Be cautious

Most reported issue: Water pump and cooling system problems. Service history and a test drive matter.

Engine / trim
2.0 BlueHDi Stop&Start
Model years
2016

Known issues and risks

Listed from most frequently reported, each with its source.

Water pump and cooling system problems

Often reported

Early wear or breakage of the water pump is reported, sometimes linked to increased stress on the impeller due to thermostat strategies.

Cooling

EGR clogging and carbon buildup

Often reported

Carbon and soot buildup in EGR valves and intake manifolds is reported on BlueHDi 2.0 vehicles (including DS5 2015); this can lead to rough running, reduced performance, and the need for periodic manual cleaning.

Engine Bay

AdBlue system faults (tank/pump)

Often reported

Recurring issues with the SCR/AdBlue system on BlueHDi engines; pump/pressurization faults and sensor problems trigger the engine warning light and fault codes.

Exhaust Emissions

Ds 4 2.0 BlueHDi Stop&Start technical specs

Ds 4 2.0 BlueHDi Stop&Start (2016): boot 359 L; fuel use 4,2 l/100 km (urban 4,9 l/100 km · extra-urban 3,8 l/100 km); 0–100 in 9.6 s.

Boot capacity
359 L
Fuel consumption
4,2 l/100 km (urban 4,9 l/100 km · extra-urban 3,8 l/100 km)
0–100 km/h
9.6 s
Top speed
207 km/s
Tire size
215/60 R16
Fuel tank
60 L
Dimensions (L×W×H)
4284 × 1810 × 1535 mm

Same trim, different year

Frequently asked questions

What should I pay attention to when buying a DS 4 2.0 BlueHDi Stop&Start?+
When buying a 2016 model 2.0 BlueHDi Stop&Start, you should check the service history, test drive, and engine/transmission warnings. The most commonly reported issues are: water pump and cooling system problems; EGR clogging and carbon buildup; AdBlue system faults (tank/pump).
What are the common problems of the DS 4 2.0 BlueHDi Stop&Start?+
The most frequently reported issues are: water pump and cooling system problems; EGR clogging and carbon buildup; AdBlue system faults (tank/pump).
Is the DS 4 2.0 BlueHDi Stop&Start reliable?+
Instead of a simple yes/no, it is necessary to consider the proven pros and cons together. This page lists 3 verified findings.
How is Carbeak data collected?+
The cards on this page are derived from European fault records records; the source vehicle and target vehicle are verified for brand, fuel, engine, and generation compatibility. Topics with insufficient evidence are not shown.

We only publish claims we can verify. Cards come from European fault records and owner reports matched to this vehicle on brand, fuel, engine and generation.

Looking at another car?

Pick make, model and year — see the report in about 30 seconds.

Analyze now