"Is the 2 Serisi 220d reliable, and what should you check?"
When buying a used BMW 2 Series 220d 2016 (F22 / F23 / F87), the most frequently mentioned issue is timing chain stretching/wear. Also, DPF clogging is commonly reported.
Engine: B47
B47D20A · 220d · Used in this car from 2015-2020
Known engine issues
EGR valveMost problems of this engine are related to the EGR system, called AGR here. In early years, the valve could clog at 30,000 km and a recall campaign was even conducted. When it sticks open, overheating causes the intake manifold to crack.
Intake cloggingThe second most frequent service issue is clogging of the intake manifold and ports in the cylinder head, leading to loss of power and unstable engine operation. In severe cases, the intake swirl flaps may stick and break off.
Timing chain stretchThe chain timing drive on B-series engines differs little from N-series predecessors and may require attention before 200,000 km under very active use. There is already a cost-effective procedure to replace these chains without removing the engine.
+1 more issues on the engine detail page
Known issues and risks
Listed from most frequently reported, each with its source.
Timing chain stretching/wear
Often reported
Although the B47 engine has reduced the severe timing chain issues of the N47 family, noise, rattling, or chain stretching during startup is reported, especially in high-mileage or poorly maintained vehicles.
Timing chain
DPF clogging
Often reported
The diesel particulate filter (DPF) tends to clog in city driving or on journeys that prevent effective regeneration.
Exhaust Emissions
Clogged/faulty EGR valve and cooler
Often reported
In the B47 family 2.0 diesel engines, including the 190 HP version, carbon buildup and failures in the EGR valve and cooler are common.
Exhaust Emissions
High-pressure pump and injectors (injection issues)
Often reported
Technical forums and service reports mention injection system anomalies (high-pressure fuel pump HPFP and injectors).
Fuel System
Turbo / wastegate issues
Often reported
Wear or failure of the wastegate actuator and turbocharger components has been reported.
Turbo
BMW 2 Serisi 220d technical specs
BMW 2 Serisi 220d (2016): boot 390 L; fuel use 4,7 l/100 km (urban 5,5 l/100 km · extra-urban 4,3 l/100 km); 0–100 in 6.9 s.
Boot capacity
390 L
Fuel consumption
4,7 l/100 km (urban 5,5 l/100 km · extra-urban 4,3 l/100 km)
What should I look for when buying a BMW 2 Series 220d?+
When buying a 2016 220d, check the service history, perform a test drive, and inspect engine/transmission warnings. Most commonly reported issues: timing chain stretching/wear; DPF clogging; clogged/faulty EGR valve and cooler.
What are the common problems of BMW 2 Series 220d?+
Most frequently reported issues: timing chain stretching/wear; DPF clogging; clogged/faulty EGR valve and cooler.
Is the BMW 2 Series 220d reliable?+
Instead of a simple yes/no, it's necessary to evaluate the proven pros and cons together. This page lists 5 verified findings.
How does Carbeak collect data?+
The cards on this page are derived from Difetti fault database records; brand, fuel, engine, and generation compatibility between the source vehicle and target vehicle are verified. Topics with insufficient evidence are not shown.